Harley Davidson Exhaust Baffle Removal

Process involved with removing stock baffles on a Harley Davidson 2013 Street Glide.

Harley davidson exhaust baffle removal. A Drill bit or a 12 hole saw A Drill bit extender A Handheld drill A Wrench set. 4 hours of your time will be enough to remove baffles for your exhaust pipe. I out grew the need for Wrongly Modified LOUD exhaust and just go with the exhaust that Performs good.

Step by step guide of. Youre left with the cage and baffle. Lets get into the proper basis of How to remove baffle from Harley Exhaust.

Unbolt the baffle from the exhaust using the 14-inch ratchet and socket. If you want performance then go to a 2 into 1 exhaust system. You may need to work around the.

This article applies to the Harley Davidson Dyna Glide 2000-2016. Insert the punch into the muffler and hit it with a hammer to make a dimple to locate your drill bit. Remove the baffle from the lower pipe by repeating the process.

You can compensate for the loss by putting in stainless reversion cones into the head pipes and Also you will need to Richen the fuel mixture a bit. Pull out the baffle by placing the needle nose pliers between the exhaust tubing and the inside of the baffle gripping it on the outside edge. This is the change to the original how-to.

Remove fibreglass shroud which is just taped together just slice it open mind the dust. Rather than go through a host of cuts and changes to get the inner tube part of the. The baffle is a metal piece inside the pipe that muffles the sound of your Harleys engine exhaust.