Harley Davidson Exhaust Flange Nut Torque

I suggest after youu get your bike to full operating temp to let it fully cool then check the bolts.

Harley davidson exhaust flange nut torque. About 4 days of riding. This allows easier access to the head pipe mounting nuts. Step 6 Raise the exhaust pipes back up and thread the head bolts and rear mounting bolts into position.

65184-02 7593. First you should pre-load the. 097-109 mm Spark plug torque - 12-18 ft-lbs 16-24 Nm Oiling System.

Harley Davidson Dyna 2006 - Current 2 into 1 HK-DY2-1 13. Harley Davidson 65184-02-7593 Exhaust Flanges Nuts Torque Cones fits model. Tighten top nut to 9 - 18 in-lbs tighten bottom nut to 100 - 120 in-lbs Re-tighten top nut to 100 - 120 in-lbs Repeat on the rear exhaust.

Mounting bracket coming off the transmission case. Starting with the front cylinder torque the top exhaust flange nut to 9-18 in-lbs 10-20 Nm ii. Tighten the top nut of the front cylinder head exhaust flange to 9 to 18 inch-pounds with a torque wrench.

Remove the clamp bolt which mounts the rear head pipe to the belt drive cover bracket. Re-tighten the top nut to 100 to 120 inch-pounds. Arrows indicate clamp screw orientation.

Fastener Size - Torque ft. Harleys head-bolt torque method harkens back to a time when torque specifications were less scientific. This might be a bit high but because it is a steel stud in an aluminum head it could serve as a guide to a maximum limit.