Harley Davidson Heated Grips Fuse Location

Splice the black hand grip wire to the black wires in the Electrical Connection Harness.

Harley davidson heated grips fuse location. Shop motorcycle grips at the official harley davidson online store. Installed a set of HD heated grips on my 07 Ultra this spring. All was good until this week.

These thermostatically controlled grips feature variable heat settings controlled with a military grade resistor and use automatic temperature monitoring to adjust to ambient temperatures. Select the correct ring terminal 4 5 or 6 from the kit to fit the silver terminal stud with the red wire on the circuit breaker. Reference the wiring diagram and gather any connectors from the kit.

I have had my Harley heated grips on my 2014 Street Glide Special for about 4 12 years now. If the accessory outlet was just installed. - Answered by a verified Motorcycle Mechanic.

Two grips in parallel as shown in our wiring diagram and applying 12 volts using a car. DO NOT cut off the in-line fuse holder on the red wire but cut the wires to a suitable length to easily reach the sealed splice connectors on the Electrical Connection Harness. That circuit also drives optional heated hand grips.

Route the heated hand grip wire harness red wire through the right side top of the frame under the seat and to the circuit breaker located near the front of the rear fender splash guard below the seat. How to Install Harley Davidson Heated grips on 2014 to. NOTE Make sure that the handlebar surface is smooth dry and thor-oughly cleaned of all dirt.

You say there is power at the fuse. On some models the fuse is not used deadheaded and a 2amp fuse is inserted. Lets take a look at where they are and what you ca.